Subset Engineering Private Limited

Subset Engineering Private Limited

HIGH PRESSURE HYDRAULIC HOSESTANDARD: SAE-100 R1 / EN 853 1SN

Hose ID		Hose OD	Working Pressure		Min. Burst Pressure		Min. Bend Radius	Application: Used for medium pressure hydraulic oil lines. Tube: Oil resistant synthetic rubber. Reinforcement: One braid of high tensile steel wire. Cover: Oil & abrasion resistant synthetic rubber. Temp. Range: (-) 40 to (+) 100 ⁰C End Fittings: As per customers' requirements.
Inch	mm	mm	PSI	Bar	PSI	Bar	mm
3/16	4.8	11.5	3600	250	14500	1000	90
¼	6.4	13.2	3250	225	13000	900	100
5/16	7.9	15.0	3100	215	12480	860	115
3/8	9.5	17.3	2600	180	10440	720	130
½	12.7	20.6	2325	160	9280	640	180
5/8	15.9	23.9	1900	130	7540	520	200
¾	19.1	27.6	1525	105	6080	420	240
1	25.4	35.3	1300	90	5100	350	300
1-1/4	31.8	43.2	925	63	3660	250	420
1-1/2	38.1	50.7	725	50	2900	200	500
2	50.8	64.2	600	40	2320	160	630

HIGH PRESSURE HYDRAULIC HOSE STANDARD: SAE-100 R2 / EN 853 2SN

Hose ID		Hose OD	Working Pressure		Min. Burst Pressure		Min. Bend Radius	Application: Used for high pressure hydraulic oil lines. Tube: Oil resistant synthetic rubber. Reinforcement: Two braid of high tensile steel wire. Cover: Oil & abrasion resistant synthetic rubber. Temp. Range: - 40 to + 100 ⁰C End Fittings: As per customers' requirements.
Inch	mm	mm	PSI	Bar	PSI	Bar	mm
¼	6.4	14.9	5800	400	23200	1600	100
5/16	7.9	16.7	5000	350	20300	1400	115
3/8	9.5	19.1	4800	330	19140	1320	130
½	12.7	22.1	4000	275	15960	1100	180
5/8	15.9	25.3	3625	250	14500	1000	200
¾	19.1	29.6	3100	215	12480	850	240
1	25.4	37.7	2400	165	9560	660	300
1-1/4	31.8	47.7	1825	125	7240	500	420
1-1/2	38.1	54.0	1300	90	5220	360	500
2	50.8	67.5	1175	80	4640	320	630

MEDIUM PRESSURE HYDRAULIC HOSE STANDARD: SAE-100 R3 / EN 854

Hose ID		Hose OD	Working Pressure		Min. Burst Pressure		Min. Bend Radius	Application: Used for medium pressure hydraulic oil lines, anti-freeze solutions or water. Tube: Black synthetic rubber. Reinforcement: Two braid of high tenacity synthetic textile yarn. Cover: Synthetic rubber. Temp. Range: - 40 to + 100 ⁰C End Fittings: As per customers' requirements.
Inch	mm	mm	PSI	Bar	PSI	Bar	mm
¼	6.4	14.5	1250	86	5000	345	75
5/16	7.9	17.5	1200	83	4800	332	100
3/8	9.5	19.1	1125	78	4500	312	100
½	12.7	23.9	1000	69	4000	276	125
5/8	15.9	27.0	875	61	3500	244	130
¾	19.0	31.8	750	52	3000	208	150
1	25.4	38.1	565	39	2250	156	200

MEDIUM PRESSURE HYDRAULIC HOSE STANDARD: SAE-100 R6 / EN 854

Hose ID		Hose OD	Working Pressure		Min. Burst Pressure		Min. Bend Radius	Application: Used for hydraulic oil lines, heavy duty transmission oil cooler lines, glycol anti-freeze solutions. It has special resistant to diesel permeation. Tube: Black Synthetic rubber. Reinforcement: One braid of high tenacity synthetic textile yarn. Cover: Oil & abrasion resistant synthetic rubber. Temp. Range: - 40 to + 135 ⁰C End Fittings: As per customers' requirements.
Inch	mm	mm	PSI	Bar	PSI	Bar	mm
¼	6.4	12.7	400	28	1600	110	65
5/16	7.9	14.2	400	28	1600	110	75
3/8	9.5	16.0	400	28	1600	110	75
½	12.7	19.8	400	28	1600	110	100
5/8	15.9	23.1	350	24	1400	97	125
¾	19.1	26.9	300	21	1200	83	138
1	25.4	33.5	250	17	1000	69	165

SPIRAL HOSES-VERY HIGH-PRESSURE STANDARD: SAE-100 R12 / EN 856 4SP

Hose ID		Hose OD	Working Pressure		Min. Burst Pressure		Min. Bend Radius	Application: Used for very high-pressure hydraulic applications. It has excellent impulse life. Tube: Black oil resistant synthetic rubber. Reinforcement: Four layers of alternated, spiraled high tensile steel wire. Cover: Oil resistant synthetic rubber. Temp. Range: - 40 to + 120 ⁰C End Fittings: As per customers' requirements.
Inch	mm	mm	PSI	Bar	PSI	Bar	mm
3/8	9.5	20.3	4000	276	16000	1104	62
½	12.7	23.9	4000	276	16000	1104	87
¾	19.0	30.7	4000	276	16000	1104	120
1	25.4	38.1	4000	276	16000	1104	150
1-1/4	31.8	47.0	3000	207	12000	828	207
1-1/2	38.1	53.0	2500	172	10000	690	500
2	50.8	66.8	2500	172	10000	690	625

SPIRAL HOSES - VERY HIGH-PRESSURE STANDARD: SAE-100 R13 / EN 856 4SH

Hose ID		Hose OD	Working Pressure		Min. Burst Pressure		Min. Bend Radius	Application: Used for extremely high-pressure hydraulic applications. Exceeds one million Impulse cycles. Tube: Black oil resistant synthetic rubber. Reinforcement: Four layer of alternated spiraled, high tensile steels wire. Cover: Oil resistant synthetic rubber. Temp. Range: - 40 to + 120 ⁰C End Fittings: As per customers' requirements.
Inch	mm	mm	PSI	Bar	PSI	Bar	mm
½	12.7	23.9	5000	345	20000	1380	175
5/8	15.9	28.2	5000	345	20000	1380	212
¾	19.1	32.0	5000	345	20000	1380	237
1	25.4	38.9	5000	345	20000	1380	300
1-1/4	31.8	50.0	5000	345	20000	1380	142
1-1/2	38.1	57.4	5000	345	20000	1380	500
2	50.8	71.1	5000	345	20000	1380	625

SMOOTH BORE TEFLON (PTFE) HOSESSTANDARD: SAE 100 R14

Hose ID	Hose OD	Working Pressure		Min. Burst Pressure		Min. Bend Radius	Application: These hoses are available for used where electrically resistive fluids are being transferred at high flow rates. Tube: The PTFE Hose Core is manufactured from Teflon / PTFE (Polytetrafluoroethylene). Braiding: one or two braiding of steel wire (BS970-1/1996 quality). Service Temp. Range: - 60 to + 260 ⁰C End Connections: As per customers' requirements
Inch	mm	PSI	Bar	PSI	Bar	mm
6.70	10.06	3330	230	10000	689	76
8.40	11.75	3000	207	9000	621	102
10.0	13.35	2660	183	8000	552	127
13.5	16.75	2330	161	7000	483	152
16.6	20.07	1660	114	5000	345	178
19.8	23.15	1500	103	4500	310	203
22.1	25.53	1330	92	4000	276	229
26.1	29.45	1160	80	3500	241	305
Advantages of Teflon Hoses over Rubber Hoses: A wide operating Temp. range, Inert to virtually all chemicals, Non-flammable, Resistance to weather/ageing, Light weight, Solvent resistant, Long life, Highly Flexible

SS CORRUGATED HOSES

Hose ID		Single Braid		Double Braid		Minimum Bend Radius	Application: SS corrugated hose is designed to convey superheated steam, liquefied gases, petroleum and chemicals products without affecting its flexibility, vibration absorption ability and fire protection ability. These hoses can handle very high pressure also. Construction: Inner corrugation made out SS-321 and outer wire braiding of SS-304. Temp. Range: (-) 200 to (+) 700 ⁰C End Connections: Flanged / Threaded types or as per customers' requirements.
Inch	mm	W.P.(Bar)	Test Pressure (Bar)	W.P. (Bar)	Test pressure (Bar)	mm
¼	6	160	240	275	412	89
3/8	10	138	207	221	331	95
½	13	103	154	176	261	102
¾	19	62	92	110	165	127
1	25	52	78	90	135	152
1-1/4	32	42	62	69	103	178
1-1/2	38	38	57	52	76	254
2	51	34	51	48	73	356
2-1/2	64	31	46	41	62	457
3	76	27	42	38	57	508
4	102	17	25	20	30	610
5	127	16	24	19	28	737
6	152	10	15	15	22	890
8	200	6	9	10	15	980

STEAM RUBBER HOSES STANDARD IS:10655-TYPE-2 / BS-5342-1

Hose ID		Hose OD	Working Pressure		Min. Burst Pressure		Min. Bend Radius	Application: Used for conveying saturated steam at a specified pressure. Tube: Black synthetic rubber. Reinforcement: One braid of high tensile steel wire. Cover: Synthetic rubber. Temp. Range: + 185 ⁰C End Fittings: As per customers' requirements..
Inch	mm	mm	PSI	Bar	PSI	Bar	mm
½	12.7	23.9	145	10	1450	100	180
5/8	15.9	27.4	145	10	1450	100	200
¾	19.0	31.3	145	10	1450	100	240
1	25.4	36.5	145	10	1450	100	300
1-1/4	31.8	44.1	145	10	1450	100	400
1-1/2	38.1	51.5	145	10	1450	100	500
2	50.8	65.2	145	10	1450	100	650

INDUSTRIAL HOSES

SN	Item	Technical specifications			Application:
SN	Item	ID Size (mm)	W.P. Kgf/cm²	B.P. Kgf/cm²	Application:
01	Rubber Hose for Air/Pneumatic/ Rock Drilling IS:446 Type-1,2,3 ISI Marked	12.5 to 75	7, 10, 14	28, 40, 56	Type 1 & 2 Hoses used with compressor for passing Air /Pneumatic pressure in the Industry. Type-3 Hose Used for Rock Drilling Purpose
02	Rubber Hose for Steam IS:10655 Type-1 & 2	10 to 50	10	100	Used for conveying saturated steam at a specified pressure.
03	Rubber Hose for Sand shot Blasting IS:5894 Type-1 & 2, ISI Marked	20 to 75	7, 10	35, 50	This hose is used for sand/shot blasting applications for conveying Sand and other abrasive materials at high velocity in heavy engineering Industries.
04	Carbon Free Heat Resistant Cable coolant rubber hose	12.5 to 75	10	40	This hose is used in electrical furnaces to protect the electrical cable and it is resistant to heat, radiation and splashes of hot metal.

THERMOPLASTIC HYDRAULIC HOSE STANDARD: SAE 100 R7

Hose ID		Hose OD	Working Pressure		Min. Burst Pressure		Min. Bend Radius	Application: Suitable for hydraulic application with increased resistance to abrasion for use with petroleum, synthetic or water-based fluids in Hydraulic systems. Suitable for Agricultural machinery, Earthmoving etc. Tube: Thermoplastic Elastomer. Reinforcement: Single Braid of Synthetic Fiber. Cover: Polyurethane, Black Color, Pin pricked. Temp. Range: (-) 54°C to (+)100°C
Inch	mm	mm	PSI	Bar	PSI	Bar	mm
3/16	4.6	11.4	3045	210	12180	840	90
¼	6.2	13.7	2780	192	11120	768	100
5/16	7.7	15.6	2535	175	10140	700	115
3/8	9.3	18.4	2275	157	9100	628	125
½	12.3	22.5	2030	140	8120	560	180
5/8	15.5	25.8	1520	105	6080	420	205
¾	18.6	28.6	1260	87	5040	348	240
1	25	36.7	1015	70	4060	280	300
Thermoplastic Hose Properties: Excellent Kick Resistance; Electrically Nonconductive; Non-Perforated Cover.

THERMOPLASTIC HYDRAULIC HOSE STANDARD: SAE 100 R8

Hose ID		Hose OD	Working Pressure		Min. Burst Pressure		Min. Bend Radius	Application: Suitable for hydraulic application with increased resistance to abrasion for use with petroleum, synthetic or water-based fluids in Hydraulic system. Tube: Thermoplastic Elastomer. Reinforcement: One or more Braids of Aramid Fiber. Cover: Polyurethane, Black Color, Pin pricked. Temp. Range: (-) 54°C to (+)100°C
Inch	mm	mm	PSI	Bar	PSI	Bar	mm
1/8	3.4	10.5	6090	420	24000	1680	25
3/16	4.6	14.6	5075	350	20000	1400	90
¼	6.2	16.8	5075	350	20000	1400	100
3/8	9.3	20.3	4060	280	16000	1120	125
½	12.3	24.6	3550	245	14000	980	180
5/8	15.5	29.8	2784	192	11600	800	205
¾	18.6	33	2280	157	9200	660	240
1	25	38.6	2030	140	8000	560	300
1.1/4	31.8	42	1500	100	6000	400	350
Thermoplastic Hose Properties: Excellent Kick Resistance; Electrically Nonconductive; Light weight.